Vostro 3401 Setup and specifications guide

PDF

Passwords

Table 1. PasswordsThe table describes the password information.
Option	Description
Enable Strong Passwords	Allows the user to enable complex admin and system passwords: On Off NOTE Deleting the admin password deletes the system password (if set). The admin password can also be used to delete hard drive password. For this reason, you cannot set an admin password if a system password or hard drive password is set. Hence, an admin password has to be set first if the admin password has to be used with system password and/or hard drive password.
Password Configuration	Allows the user to set the maximum number of characters for Admin and System oasswords: Admin Password Min (04) Admin Password Max (32) System Password Min (04) System Password Max (32)
Admin Password	Allows you to configure an admin password. NOTE Deleting the admin password deletes the system password (if set). The admin password can also be used to delete hard drive password. For this reason, you cannot set an admin password if a system password or hard drive password is set. Hence, an admin password has to be set first if the admin password has to be used with system password and/or hard drive password. Upper Case Letter When enabled, this field reinforces password must contain at least one upper capital letter. Lower Case Letter When enabled, this field reinforces password must contain at least one lower capital letter. Digit When enabled, this field reinforces password must contain at least one-digit number. Special Character When enabled, this field reinforces password must contain at least one special character. NOTE These options by default are disabled. Minimum Characters Defines the number of characters allowed for a password. Min = 4
Password Bypass	Allows you to bypass the System password and the Internal hard drive password, when it is set, during a system restart. The options are: Disabled—This option is enabled by default. Reboot bypass
Password Changes	Allows you to change the system password and hard drive password without the need of administrator password. Enable Non-Admin Password Changes - By default, this option is disabled.
Admin Setup Lockout	Allows the administrator to control how the user can access BIOS setup. Enable Admin Setup Lockout - By default, this option is disabled. NOTE If the admin password is set and Enable Admin Setup Lockoutis enabled, you cannot view the BIOS setup (using F2 or F12) without the admin password. If the admin password is set and Enable Admin Setup Lockoutis disabled, the BIOS setup can be entered and items that are viewed in Locked mode.
Master Password Lockout	Allows you to disable master password support. Enable Master Password Lockout - By default, this option is disabled. NOTE The Hard Disk password has to be cleared before the settings can be changed.