- Notes, cautions, and warnings
- Working on your computer
- Removing and installing components
- Technology and components
- Troubleshooting your computer
- System Setup
- System Setup
Options
- System Setup overview
- Accessing System Setup
- System setup
options
- General screen options
- System configuration screen options
- System Configuration screen options
- Security screen options
- Secure boot screen options
- Intel Software Guard Extensions options
- Performance screen options
- Power management screen options
- POST behavior screen options
- Virtualization support screen options
- Maintenance screen options
- System Log screen options
- SupportAssist System Resolution options
- Technical specifications
- Contacting Dell
Dell Vostro 3660/3669 Owner's Manual
Installing the system board
- Hold the system board by its edges and align it toward the back of the computer.
- Lower the system board into the computer until the connectors at the back of the system board align with the slots on the chassis, and the screw holes on the system board align with the standoffs on the computer.
- Tighten the 6-32xL6.35 screws to secure the system board to the computer.
- Route all the cables through the routing tabs.
- Align the cables with the pins on connectors on the system board and connect the cables.
- Install the:
- Close the front panel door.
- Install the:
- Follow the procedure in After working inside your computer .
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\