The following table provides the list of INI parameters:
NOTE: Every INI parameter is associated with a parent INI parameter. Use these INI parameters along with the corresponding parent INI parameters.
Table 1. INI parametersINI parameters
INI parameters
Description
[BlockPhones={yes, no, 1, 0}]
This parameter enables you to stop the Media Transfer Protocol (MTP) devices from redirecting into the session when you set the parameter to
1 or yes.
[eap_packet_timeout={}]
This parameter defines the timeout value of the EAP process. By default, the value is set to 3 s. If the thin client does not receive the EAP response packet from the access point in a specified time period, it considers this EAP process as timeout and failure.
[WlanReconnectCount={4, 20000}]
This parameter enables you to specify the number of times the thin client scans for the hidden SSID when the access points in a wireless connection take longer time to reboot.
[WlanBeaconTimeout={0, None}]
This parameter enables you to set the number of seconds to wait, in order to initiate roaming after beacon loss timeout in a wireless connection. By default, the value is set to 2 s.
[WlanNextRoam={0, None}]
This parameter specifies the minimum time that is taken between two consecutive roaming sessions in a wireless connection. By default, the value is set to 5 s.
[TrackpadDisableOnType={yes, no}]
This parameter disables the trackpad while typing. By default, the value is set to
no.
[TouchScreenDisable={yes, no}]
This parameter allows you to disable the touch screen of the Dell Wyse 5470 Thin Client. By default, the value is set to
no.
[EnableMFA={yes, no}]
This parameter allows you to enable the MFA option in the Amazon WorkSpaces login window. If this parameter is enabled, the automatic sign-on is disabled on the system. By default, the value is set to
no.
[UseRegistrationCode={yes, no}]
This parameter enables you to enter a registration code as the broker address instead of IP/URL. This parameter works only with Amazon WorkSpaces. By default, the value is set to
no.
[BitmapsMap={yes, no}]
This parameter enables you to map integrated bitmaps to customized bitmaps.
[HorizonIsClassic={yes, no}]
This parameter enables you to set the VMware mode in classic mode.
[WordWrap={yes, no}]
This parameter allows you to enable the word wrap feature. Enabling this feature wraps the text to display correctly. By default, the value is set to
no.
For more information about the newly added INI parameters, see the
Dell Wyse ThinOS 8.6 INI Reference Guide at
www.dell.com/support.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\