Dell Wyse Management Suite Version 1.1 Administrator’s Guide

PDF

Configuring other settings

Use this page to configure the thin client settings, such as power, shared drive, and clock settings for Windows Embedded Standard devices.

Table 1. Configuring appliance modeConfiguring Appliance Mode
Option	Description
Appliance Mode	Select this option to set an appropriate mode for the appliance. From the drop-down menu, select any of the following options: Off Generic VMware View Citrix Internet Explorer RDP

Table 2. Configuring power settingsPower Settings
Option	Description
Device Power Plan	Select this option to choose a power plan for your device. From the drop-down menu, select either of the following options: Balanced Power Saver

Table 3. Configuring power settings on batteryPower Settings on Battery
Option	Description
Device Sleep Plan	Select this option to set the time after which your device goes to sleep mode. From the drop-down menu, select a delay time.
Dim Display	Select this option to set the time after which the display is dimmed. From the drop-down menu, select a delay time.
Turn Off Display	Select this option to set the time after which the display is turned off. From the drop-down list, select a delay time.

Table 4. Configuring power settings when plugged-inPower Settings When Plugged In
Option	Description
Device Sleep Plan	Select this option to set the time after which your device goes to sleep mode. From the drop-down menu, select a delay time.
Dim Display	Select this option to set the time after which the display is dimmed. From the drop-down menu, select a delay time.
Turn Off Display	Select this option to set the time after which the display is turned off. From the drop-down menu, select a delay time.

Table 5. Configuring shared drivesConfiguring Shared Drives
Option	Description
Shared Drive	Select this option to add a shared drive to your device. Click Add Shared Drive. Enter the share name, remote drive path, user name, and password for the shared drive. NOTE: To delete a shared drive from the list, select the shared drive that you want to remove and click Remove.

Table 6. Configuring clock settingsClock Settings
Option	Description
Clock1	Select this option to configure Clock 1 on your device. After you enable Clock1, set the Display Name for the clock. From the drop-down menu, select the Time Zone for Clock 1.
Clock2	Select this option to configure Clock 2 on your device. After you enable Clock 2, set the Display Name for the clock. From the drop-down menu, select the Time Zone for Clock 2.