Trusted Platform
Module (TPM) security
TPM must be enabled in the BIOS setup program for it to be
deployed on the computer. Follow these steps to enable and configure the TPM:
- Turn on or restart your computer.
- Press F2 when the Dell logo is displayed on
the screen to enter the BIOS setup program.
The BIOS setup program is displayed.
- On the left pane, select .
- Select or clear any of the following options
to enable or disable it, respectively:
- Enabled (Default): The
BIOS enables the TPM during POST and it can be accessed by the
operating system.
- Disabled: The BIOS will not enable the TPM during
POST and it cannot be accessed by the operating system.
- TPM On: The TPM is
enabled and activated.
- Clear: The BIOS clears
the information stored in the TPM.
- Save the settings and exit.
Data is not available for the Topic