Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell PowerEdge T630 Owner's Manual

PDF

Installing the system cover

Prerequisites

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
  3. Ensure that all internal cables are connected and placed out of the way, and no tools or extra parts are left inside the system.

Steps

  1. Align the slots on the system cover with the tabs on the chassis.
  2. Press the cover release latch, and push the cover toward the chassis until the latch locks into place.
  3. Rotate the latch release lock clockwise to the locked position.
    Figure 1. Installing the system cover
    This image shows Installing the system cover
    1. system
    2. system cover
    3. cover release latch
    4. cover release latch lock

Next steps

  1. Place the system upright on its feet on a flat and stable surface.
  2. If removed, install the front bezel.
  3. Reconnect the peripherals and connect the system to the electrical outlet.
  4. Turn on the system, including any attached peripherals.
  5. Follow the procedure listed in the After working inside your system section.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\