- Notes, cautions, and warnings
- Dell PowerEdge T630 server overview
- Converting the system from tower mode to rack mode
- Documentation resources
- Technical specifications
- Initial system setup and configuration
- Pre-operating system management applications
- Options to manage the pre-operating system applications
- System Setup
- Device Settings
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Installing and removing system components
- Safety instructions for converting system from tower to rack
- Before working inside your system
- After working inside your system
- Recommended tools
- Front bezel (optional)
- System feet
- Caster wheels – optional
- System cover
- Inside the system
- Cooling shroud
- Cooling fans
- Cooling-fan assembly (optional)
- System memory
- Flex bays
- Hard drives
- Removing a hot swappable hard drive or solid state drive
- Installing a hot swappable hard drive
- Removing a 2.5-inch hard drive blank
- Installing a 2.5-inch hard drive blank
- Removing a 3.5-inch hard drive blank
- Installing a 3.5-inch hard drive blank
- Installing a 2.5-inch hard drive into a 3.5-inch hard drive adapter
- Removing a 2.5-inch hard drive from a 3.5-inch hard drive adapter
- Installing a 3.5-inch hard drive adapter into a hot swap hard drive carrier
- Removing a 3.5-inch hot swappable hard drive adapter from a 3.5-inch hot swappable hard drive carrier
- Removing a hard drive or a solid state drive from a hard drive carrier
- Installing a hot swappable hard drive into a hot swappable hard drive carrier
- Optical drives and tape drives
- Internal USB memory key (optional)
- Expansion card holder
- Expansion cards
- GPU card holder (optional)
- GPU cards (optional)
- Internal dual SD module (optional)
- Internal SD card
- Processors and heat sinks
- Power supply unit
- System battery
- Hard drive backplane
- SD vFlash card (optional)
- Control panel assembly
- System board
- Trusted Platform Module
- Power interposer board and power distribution board
- Using system diagnostics
- Jumpers and connectors
- Troubleshooting your system
- Troubleshooting system startup failure
- Troubleshooting external connections
- Troubleshooting the video subsystem
- Troubleshooting a USB device
- Troubleshooting a serial input and output device
- Troubleshooting a NIC
- Troubleshooting a wet system
- Troubleshooting a damaged system
- Troubleshooting the system battery
- Troubleshooting power supply units
- Troubleshooting cooling problems
- Troubleshooting cooling fans
- Troubleshooting system memory
- Troubleshooting an internal USB key
- Troubleshooting a micro SD card
- Troubleshooting an optical drive
- Troubleshooting a drive or SSD
- Troubleshooting a storage controller
- Troubleshooting expansion cards
- Troubleshooting processors
- Getting help
Dell PowerEdge T630 Owner's Manual
System board connectors
| Item | Connector | Description |
|---|---|---|
| 1 | SLOT1 PCIE_G3_X16 (CPU1) | PCIe card connector 1 |
| 2 | SLOT2 PCIE_G2_X4 (PCH) | PCIe card connector 2 |
| 3 | SLOT3 PCIE_G3_X16 (CPU1) | PCIe card connector 3 |
| 4 | B1, B5, B9, B2, B6, B10 | Memory module sockets |
| 5 | FAN1 | Cooling shroud fan connector |
| 6 | CPU2 | Processor 2 |
| 7 | FAN2 | Fan connector |
| 8 | B12, B8, B4, B11, B7, B3 | Memory module sockets |
| 9 | SLOT4 PCIE_G3_X8 (CPU2) | PCIe card connector 4 |
| 10 | SLOT5 PCIE_G2_X4 (CPU2) | PCIe card connector 5 |
| 11 | SLOT6 PCIE_G3_X16 (CPU2) | PCIe card connector 6 |
| 12 | SLOT7 PCIE_G3_X16 (CPU2) | PCIe card connector 7 |
| 13 | CPU1 | Processor 1 |
| 14 | TPM_Module | Trusted Platform Module (TPM) connector |
| 15 | PIB_CONN | PIB signal connector |
| 16 | FAN6 | Fan connector |
| 17 | PWR_CONN_2 | PIB signal connector |
| 18 | A10, A6, A2, A9, A5, A1 | Memory module sockets |
| 19 | BP_SIG2 | Backplane signal connector 2 |
| 20 | FAN5 | Cooling shroud fan connector |
| 21 | PWR_CONN_1 | Power connector |
| 22 | BP_SIG1 | Backplane signal connector 1 |
| 23 | BP_SIG0 | Dell PowerEdge Express Flash (PCIe SSD) signal connector |
| 24 | A3, A7, A11, A4, A8, A12 | Memory module sockets |
| 25 | FAN4 | Cooling shroud fan connector |
| 26 | INTRUSION | Chassis intrusion switch connector |
| 27 | FP_USB | Control panel USB connector |
| 28 | CTRL_PNL | Control panel interface connector |
| 29 | FAN3 | Cooling shroud fan connector |
| 30 | PWRD_EN | See System board jumper settings |
| 31 | NVRAM_CLR | See System board jumper settings |
| 32 | SW RAID_B | SW RAID connector 2 |
| 33 | SW RAID_A | SW RAID connector 1 |
| 34 | IDSDM | Internal dual SD module connector |
| 35 | SATA_TBU | Tape drive SATA connector |
| 36 | BATTERY | System battery connector |
| 37 | SATA_CDROM | Optical drive SATA connector |
| 38 | INT_USB_3.0 | Internal USB 3.0 connector |
| 39 | SLOT8 PCIE_G3_X8 (CPU1) | PCIe card connector 8 |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\