Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

Allows you to view, export, or clear the chassis log history.

To clear a chassis log, you must have the Clear Logs Administrator previlege.

racadm chassislog view -i <
                                                nNumber of records> -c <
                                                
                                                   log type
                                                > -s <
                                                severity> -q <
                                                sequence no.> -n <
                                                number of records> -r <
                                                start timestamp> -e <
                                                end timestamp>
                                             

• -i — Displays the number of records present in the active log. You cannot use this option with any other option.
• -c — The log type to filter the records. Provide multiple categories using a "," as the delimiter. The value is case-insensitive. Valid Category values:
  • All
  • System
  • Updates
  • Audit
  • Config
• -q - The sequence number from which the records must be displayed.
• -n - Specifies the n Number of records to be displayed.
• -r - Displays events that have occurred after this time. The time format is yyyy-mm-dd HH:MM:SS. The time stamp must be provided within double quotes.
• -e - Displays events that have occurred before this time. The time format is yyyy-mm-dd HH:MM:SS. The time stamp must be provided within double quotes.
• -s — The severity used to filter the records. Provide multiple severities using a "," as the delimiter. The value is case-insensitive. Valid Severity values:
  • 1. Warning
  • 2. Critical
  • 3. Info

• Display the number of records present in the Chassis Log:

  racadm chassislog view -i

• Display the records having severities set to warning or critical, starting from sequence number 4:

  racadm chassislog view -s warning,critical -q 4

• Display 5 records starting from sequence number 20:

  racadm chassislog view -q 20 -n 5

• Display all records of events that have occurred between 2011-01-02 23:33:40 and 2011-01-03 00:32:15:

  racadm chassislog view -r "2011-01-02 23:33:40" -e "2011-01-03 00:32:15"

• Display all the available records from the active Chassis log:

  racadm chassislog view -n all

• Display the last 25 records from the Chassis log:

  racadm chassislog view