Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

setsysinfo

Description	Sets the name or location of the chassis. To use this subcommand, you must have the Administrator privilege. NOTE: The special characters " (double quote), ` (back quote), &(ampersand), and \ (backslash) are not supported for this subcommand.
Synopsis	racadm setsysinfo [-c chassisname\|chassislocation] < string>
Input	< string > — Indicates a maximum of 64 non-extended ASCII chassis name or location. -c — Sets the chassis name or location.
Example	racadm setsysinfo -c chassisname "Dell Rack System" The chassis name was set successfully.