Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

racresetcfg

Description	Resets CMC configuration to factory default settings. NOTE: To use this, you must have the Chassis Administrator privilege.
Synopsis	`racadm racresetcfg [-m < module>] [-c < feature>]`
Input	-m : <module> — Must be one of the following values: chassis — default state, if -m is not specified. server-<n> — where n=1–4 server-<nx> — where n=1–4 and x=a-d (lower case) NOTE: The values n= 2 and 4 are valid for multi-node sleds only -c : <feature> — Must be one of the following values: ad — Reset Active Directory and LDAP properties to the default value. The default setting is “disabled”. pcap — Reset Power Cap properties to the default value. flex — Reset FlexAddress properties to the default value. The default setting is “disabled”. NOTE: The –c option is valid with only <module=chassis> only. NOTE: If the `racresetcfg` is performed on a chassis, the CMC resets after the task.
Example	Perform reset of configuration data to defaults for server-1 module. racadm racresetcfg -m server-1 Perform reset of power cap feature. racadm racresetcfg -c pcap