Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

Description

Sets the N-byte ASCII asset tag for the chassis.

To use this subcommand, you must have the Administrator privilege.

Synopsis

racadm setassettag -m chassis <
                                                asset tag>
                                             

Input

-m < module > — Specifies the module whose asset tag you want to set.

Legal value: chassis

You can obtain the same output if you do not include this option, because there is only one legal value.

< assettag > is a maximum of 64 non-extended ASCII characters.

Example

• racadm setassettag -m chassis 783839–33

• racadm setassettag 783839–33

  The asset tag was changed successfully.