Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

Sets the name of the slot and enables the feature to display the host name (if available) or iDRAC DNS name of all the four slots, or of a specified slot (indicated by the slot number) in the chassis. Optionally, use this command to set whether the slot name or host name is displayed in the CMC web interface or with the getslotname -i < slot Num> command. If the host name is not available, the static slot name is used.

To use this subcommand, you must have the Administrator privilege.

• racadm setslotname [-i < slotNum> < slotname> | -h 0|1|2]
• racadm setslotname -h < value>

• -i < slotNum> — Specify the slot number in the chassis. Valid values: 1 to 4.
• < slotname> — The new name to be assigned to the slot.
• —h < values> — Displays the Hostname, Slotname, or iDRAC DNS name. The legal values are:
  • 0 — Displays the Slotname
  • 1 — Displays the Hostname
  • 2 — Displays the iDRAC DNS name

• Set the name of slot 3 as server3:

  racadm setslotname -i 3 server3

• Enable system to display host names (1=Hostname):

  racadm setslotname -h 1