- Notes, cautions, and warnings
- Working inside your computer
- Removing and installing components
- Drivers and downloads
- System setup
- Troubleshooting
- Getting help and contacting Dell
Le damos la bienvenida
Le damos la bienvenida a Dell
Mi cuenta
- Realice pedidos rápida y fácilmente.
- Vea los pedidos y haga el seguimiento del estado del envío.
- Cree una lista de sus productos y acceda a ella
- Gestione sus sitios, productos y contactos a nivel de producto de Dell EMC con la administración de empresa.
Inspiron 5490 Service Manual
Removing the base cover
Prerequisites
- Follow the procedure in Before working inside your computer.
About this task
The following image indicates the location of the base cover and provides a visual representation of the removal procedure.
Steps
- Loosen the two captive screws and remove the seven screws (M2x5) that secure the base cover to the palm-rest and keyboard assembly.
- Pry the base cover starting from the right hinge and work your way around.
- Lift the base cover off the palm-rest and keyboard assembly.
- Peel off the tape that secures the battery cable to the system board.
- Disconnect the battery cable from the system board.
- Press and hold the power button for five seconds to ground the computer and drain the flea power.
Proporcione valoraciones (1-5 estrellas).
Proporcione valoraciones (1-5 estrellas).
Proporcione valoraciones (1-5 estrellas).
Seleccione si el artículo le ha resultado útil o no.
Los comentarios no pueden contener caracteres especiales: <>()\