- Notes, cautions, and warnings
- Working inside your computer
- Removing and installing components
- Drivers and downloads
- System setup
- Troubleshooting
- Getting help and contacting Dell
Le damos la bienvenida
Le damos la bienvenida a Dell
Mi cuenta
- Realice pedidos rápida y fácilmente.
- Vea los pedidos y haga el seguimiento del estado del envío.
- Cree una lista de sus productos y acceda a ella
- Gestione sus sitios, productos y contactos a nivel de producto de Dell EMC con la administración de empresa.
Inspiron 5490 Service Manual
Installing the display assembly
Prerequisites
About this task
The following image indicates the location of the display assembly and provides a visual representation of the installation procedure.
Steps
- Place the display assembly on a clean and flat surface.
- Align and place the palm-rest and keyboard assembly on the display assembly.
- Using the alignment posts, close the left and the right display hinges.
- Replace the four screws (M2.5x5) that secure the left and the right display hinges to the palm-rest and keyboard assembly.
- Connect the display cable to the system board and adhere the tape that secures the display-cable connector.
Next steps
- Install the battery.
- Install the base cover.
- Follow the procedure in After working inside your computer.
Proporcione valoraciones (1-5 estrellas).
Proporcione valoraciones (1-5 estrellas).
Proporcione valoraciones (1-5 estrellas).
Seleccione si el artículo le ha resultado útil o no.
Los comentarios no pueden contener caracteres especiales: <>()\