Ir al contenido principal
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella

Dell Latitude 7280 Owner's Manual

Installing LED board

  1. Insert the LED board into the slot on the computer.
  2. Tighten the M2.0 x 2.5 screw to secure the LED board.
  3. Route the LED cable through the routing channel.
  4. Connect the LED cable to the system board.
  5. Connect the battery cable to the connector on the system board.
  6. Install the base cover.
  7. Follow the procedure in After working inside your computer.

Valore este contenido

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
0/3000 characters
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Seleccione si el artículo le ha resultado útil o no.
  Los comentarios no pueden contener caracteres especiales: <>()\