Ir al contenido principal
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella
  • Gestione sus sitios, productos y contactos a nivel de producto de Dell EMC con la administración de empresa.

Dell Latitude E6540 Owner's Manual

Removing the Display Assembly

Steps

  1. Follow the procedures in Before Working Inside your computer.
  2. Remove:
    1. battery
    2. display-hinge cap
    3. base cover
    4. base-corner cover
  3. Disconnect the antenna cables connected to the WLAN card and release it from the routing channel. Disconnect the camera cable from the system board.
    Figure displaying how to remove the WLAN antenna and camera cable from the system board.
  4. Disconnect the LVDS cable and release the LVDS cable and camera cable from the routing channel. Remove them from the computer.
    Figure displaying how to remove the LVDS cable and camera cable from the computer.
  5. Remove the screws that secure the display assembly to the computer.
    Figure displaying how to remove the screw that secures the display assembly to the computer.
  6. Remove the display assembly from the computer.
    Figure displaying how to remove the display assembly from the computer.

Valore este contenido

Acertado
Útil
Fácil de entender
¿Le ha resultado útil este artículo?
0/3000 characters
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Proporcione valoraciones (1-5 estrellas).
  Seleccione si el artículo le ha resultado útil o no.
  Los comentarios no pueden contener caracteres especiales: <>()\