Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

clear ip ospf statistics

Clear the packet statistics in interfaces and neighbors.

Syntax

clear ip ospf process-id statistics [interface name {neighbor router-id}]

Parameters

process-id	Enter the OSPF Process ID to clear a specific process. If no Process ID is entered, all OSPF processes are cleared.
interface name	(OPTIONAL) Enter the keyword `interface` then one of the following interface keywords and slot/port or number information: For Port Channel groups, enter the keywords `port-channel` then a number. The range is from 1 to 128. For a 10-Gigabit Ethernet interface, enter the keyword `TenGigabitEthernet` then the slot/port information. For a VLAN, enter the keyword `vlan` then a number from 1 to 4094.
neighbor router-id	(OPTIONAL) Enter the keyword `neighbor` then the neighbor’s router-id in dotted decimal format (A.B.C.D.).

Defaults

none

Command Modes

EXEC Privilege

Supported Modes

Full—Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

show ip ospf statistics — displays the OSPF statistics.