Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

timers bgp

Adjust the BGP Keep Alive and Hold Time timers.

Syntax

timers bgp keepalive holdtime

To return to the default, use the no timers bgp command.

Parameters

keepalive	Enter a number for the time interval, in seconds, between keepalive messages sent to the neighbor routers. The range is from 1 to 65535. The default is 60 seconds.
holdtime	Enter a number for the time interval, in seconds, between the last keepalive message and declaring the router dead. The range is from 3 to 65535. The default is 180 seconds.

Defaults

none

Command Modes

EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.