Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

match mac dot1p

Configure a match criterion for a class map based on a dot1p value.

Syntax

match mac dot1p {dot1p-list}

Parameters

dot1p-list

Enter a dot1p value. The range is from 0 to 7.

Defaults

none

Command Modes

CLASS-MAP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To access this command, enter the class-map command. After the class map is identified, you can configure the match criteria.

Related Commands

class-map — identifies the class map.