Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

max-paths

Configure the maximum number of parallel routes (multipath support) BGP supports.

Syntax

max-paths {ebgp | ibgp} number

To return to the default values, enter the no maximum-paths command.

Parameters

ebgp	Enter the keyword `ebgp` to enable multipath support for External BGP routes.
ibgp	Enter the keyword `ibgp` to enable multipath support for Internal BGP routes.
number	Enter a number as the maximum number of parallel paths. The range is from 2 to 64.

Defaults

none

Command Modes

ROUTER BGP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

If you enable this command, use the clear ip bgp * command to recompute the best path.