Dell PowerEdge C4130 Owner's Manual

The PowerEdge C4130 system supports PCI express (PCIe) generation 3 expansion cards, which need to be installed on the system board by using expansion card risers. This system supports four expansion card riser configurations. The following table provides detailed information about the expansion card riser configurations:

Table 1. Expansion card riser configurationsThe Expansion card riser configurations table contains the possible 4 configurations for the expansion card riser.

Expansion card riser	PCIe slots on the riser	Height	Length	Link
Configuration 1 (System Config: D and G)	Slot 1	half height	half Length	x16
	Slot 2	half height	half Length	x16
Configuration 2 (System Config: A, B, and K)	Slot 1	half height	half Length	x8
	Slot 2	half height	half Length	x16
Configuration 3 (System Config: C, F, and H)	Slot 1	half height	half Length	x8
	Slot 2	half height	half Length	x8
Configuration 4 (System Config: E and I)	Slot 1	half height	half Length	x8
	Slot 2	NA	NA	NA