Dell PowerEdge C4130 Owner's Manual

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. If applicable, install the expansion card(s) into the expansion card riser. For more information, see Installing expansion cards section.

CAUTION: The expansion card riser should be installed in the system before you connect the expansion card riser cables to prevent pin damage in the PCIe connectors on the system board or the NVLink board (if installed).

1. If applicable, connect the riser cables to the system board or if installed, the NVLink board.
2. Install the PCIe shroud.
3. Follow the procedure listed in the After working inside your system section.
4. Install any device drivers required for the expansion card. For more information, see the documentation for the card.