Remove the power supply unit (PSU) blank when
you are installing a second PSU or a 2.5 inch hard drive cage in the
PSU 2 slot.
Prerequisites
CAUTION: Many repairs may only
be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation,
or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that are
shipped with your product.
CAUTION: To ensure proper system cooling, the PSU blank must
be installed in the PSU 2 slot in a non-redundant configuration. Remove
the PSU blank only if you are installing a second PSU or a 2.5 inch
hard drive cage.
Follow the safety guidelines listed in the Safety instructions section.
Steps
Remove the PSU blank from the PSU 2 slot by
pulling the blank outward.
Figure 1. Removing the
PSU blank
PSU blank
PSU bay
Next steps
Install PSU 2 or the 2.5 inch hard drive cage.
Los datos no están disponibles para el tema
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"
