Dell PowerEdge C4130 Owner's Manual

Installing a GPU blank

You can install the GPU blank only in configuration D. To install GPU 2, install the GPU blank in GPU slot 1.

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dell certified service technicians.

Follow the safety guidelines listed in the Safety instructions section.

Steps

Lower the front of the GPU blank at an angle and slide it to engage the slots on the GPU blank with the guide pins on the front inner wall of the chassis.
Lower the back of the GPU blank to engage the guide holes on the GPU blank with the guide pins on the chassis.
Figure 1. Installing a GPU blank
1. guide pin on the front inner wall of the chassis (2)
2. slot on the GPU blank (2)
3. GPU blank
4. guide holes on the back of the GPU blank (2)
5. guide pin on the chassis (2)

Next steps

Install GPU 2.

Bienvenido

Bienvenido a Dell

Dell PowerEdge C4130 Owner's Manual

Installing a GPU blank

Prerequisites

Steps

Next steps

Califique este contenido