Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Display the Logging Buffer and the Logging Configuration

To display the current contents of the logging buffer and the logging settings for the system, use the show logging command in EXEC privilege mode. When RBAC is enabled, the security logs are filtered based on the user roles. Only the security administrator and system administrator can view the security logs.

Example of the show logging Command 

Dell#show logging
                                 syslog logging: enabled
                                 Console logging: level Debugging
                                 Monitor logging: level Debugging
                                 Buffer logging: level Debugging, 40 Messages Logged, Size (40960 bytes)
                                 Trap logging: level Informational
                                 %IRC-6-IRC_COMMUP: Link to peer RPM is up
                                 %RAM-6-RAM_TASK: RPM1 is transitioning to Primary RPM.
                                 %RPM-2-MSG:CP1 %POLLMGR-2-MMC_STATE: External flash disk missing in 'slot0:'
                                 %CHMGR-5-CARDDETECTED: Line card 0 present
                                 %CHMGR-5-CARDDETECTED: Line card 2 present
                                 %CHMGR-5-CARDDETECTED: Line card 4 present
                                 %CHMGR-5-CARDDETECTED: Line card 5 present
                                 %CHMGR-5-CARDDETECTED: Line card 8 present
                                 %CHMGR-5-CARDDETECTED: Line card 10 present
                                 %CHMGR-5-CARDDETECTED: Line card 12 present
                                 %TSM-6-SFM_DISCOVERY: Found SFM 0
                                 %TSM-6-SFM_DISCOVERY: Found SFM 1
                                 %TSM-6-SFM_DISCOVERY: Found SFM 2
                                 %TSM-6-SFM_DISCOVERY: Found SFM 3
                                 %TSM-6-SFM_DISCOVERY: Found SFM 4
                                 %TSM-6-SFM_DISCOVERY: Found SFM 5
                                 %TSM-6-SFM_DISCOVERY: Found SFM 6
                                 %TSM-6-SFM_DISCOVERY: Found SFM 7
                                 %TSM-6-SFM_SWITCHFAB_STATE: Switch Fabric: UP
                                 %TSM-6-SFM_DISCOVERY: Found SFM 8
                                 %TSM-6-SFM_DISCOVERY: Found 9 SFMs
                                 %CHMGR-5-CHECKIN: Checkin from line card 5 (type EX1YB, 1 ports)
                                 %TSM-6-PORT_CONFIG: Port link status for LC 5 => portpipe 0: OK portpipe 1: N/A
                                 %CHMGR-5-LINECARDUP: Line card 5 is up
                                 %CHMGR-5-CHECKIN: Checkin from line card 12 (type S12YC12, 12 ports)
                                 %TSM-6-PORT_CONFIG: Port link status for LC 12 => portpipe 0: OK portpipe 1: N/A
                                 %CHMGR-5-LINECARDUP: Line card 12 is up
                                 %IFMGR-5-CSTATE_UP: changed interface Physical state to up: So 12/8
                                 %IFMGR-5-CSTATE_DN: changed interface Physical state to down: So 12/8

To view any changes made, use the show running-config logging command in EXEC privilege mode.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"