Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Using SCP with SSH to Copy a Software Image

To use secure copy (SCP) to copy a software image through an SSH connection from one switch to another, use the following commands.

  1. On Switch 1, set the SSH port number ( port 22 by default). CONFIGURATION MODE ip ssh server port number
  2. On Switch 1, enable SSH. CONFIGURATION MODE copy ssh server enable
  3. On Switch 2, invoke SCP. CONFIGURATION MODE copy scp: flash:
  4. On Switch 2, in response to prompts, enter the path to the desired file and enter the port number specified in Step 1. EXEC Privilege Mode
  5. On the chassis, invoke SCP. CONFIGURATION mode copy scp: flash:

Example of Using SCP to Copy from an SSH Server on Another Switch

The following example shows the use of SCP and SSH to copy a software image from one switch running SSH server on UDP port 99 to the local switch.

Other SSH related command include:

  • crypto key generate : generate keys for the SSH server.
  • debug ip ssh : enables collecting SSH debug information.
  • ip scp topdir : identify a location for files used in secure copy transfer.
  • ip ssh authentication-retries : configure the maximum number of attempts that should be used to authenticate a user.
  • ip ssh connection-rate-limit : configure the maximum number of incoming SSH connections per minute.
  • ip ssh hostbased-authentication enable : enable host-based authentication for the SSHv2 server.
  • ip ssh key-size : configure the size of the server-generated RSA SSHv1 key.
  • ip ssh password-authentication enable : enable password authentication for the SSH server.
  • ip ssh pub-key-file : specify the file the host-based authentication uses.
  • ip ssh rhostsfile : specify the rhost file the host-based authorization uses.
  • ip ssh rsa-authentication enable : enable RSA authentication for the SSHv2 server.
  • ip ssh rsa-authentication : add keys for the RSA authentication.
  • show crypto : display the public part of the SSH host-keys.
  • show ip ssh client-pub-keys : display the client public keys used in host-based authentication.
  • show ip ssh rsa-authentication : display the authorized-keys for the RSA authentication. 
Dell#copy scp: flash:
                                 Address or name of remote host []: 10.10.10.1
                                 Port number of the server [22]: 99
                                 Source file name []: test.cfg
                                 User name to login remote host: admin
                                 Password to login remote host:

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"