Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Preventing MSDP from Advertising a Local Source

To prevent MSDP from advertising a local source, use the following command.

Prevent an RP from advertising a source in the SA cache. CONFIGURATION mode ip msdp sa-filter list in peer list ext-acl

Example of Verifying the System is not Advertising Local Sources

In the following example, R1 stops advertising source 10.11.4.2. Because it is already in the SA cache of R3, the entry remains there until it expires.
[Router 1]
                                 R1_E600(conf)#do show run msdp
                                 !
                                 ip multicast-msdp
                                 ip msdp peer 192.168.0.3 connect-source Loopback 0
                                 ip msdp sa-filter out 192.168.0.3 list mylocalfilter
                                 R1_E600(conf)#do show run acl
                                 !
                                 ip access-list extended mylocalfilter
                                 seq 5 deny ip host 239.0.0.1 host 10.11.4.2
                                 seq 10 deny ip any any
                                 R1_E600(conf)#do show ip msdp sa-cache
                                 MSDP Source-Active Cache - 1 entries
                                 GroupAddr  SourceAddr  RPAddr       LearnedFrom  Expire  UpTime
                                 239.0.0.1  10.11.4.2   192.168.0.1  local        70      00:27:20
                                 R3_E600(conf)#do show ip msdp sa-cache
                                 MSDP Source-Active Cache - 1 entries
                                 GroupAddr  SourceAddr  RPAddr       LearnedFrom  Expire  UpTime
                                 239.0.0.1  10.11.4.2   192.168.0.1  192.168.0.1  1       00:10:29
                                 
                                 [Router 3]
                                 R3_E600(conf)#do show ip msdp sa-cache
                                 R3_E600(conf)#
                              

To display the configured SA filters for a peer, use the show ip msdp peer command from EXEC Privilege mode.


Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"