Passer au contenu principal

Dell OpenManage SNMP Reference Guide Version 8.1

PDF

Controller Table

This table describes available properties for each controller on the managed system.

The following object sets up the Controller Table.

Table 1. Controller Table
Name	`controllerTable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1
Description	Defines the controller table, which is a table of managed Redundant Array of Independent disks (RAID) controllers. The number of entries is related to the number of RAID controllers discovered in the system.
Syntax	SEQUENCE OF ControllerEntry
Access	Not accessible

Table 2. Controller Entry
Name	`controllerEntry`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1
Description	Defines the controller table entry, which is an entry in the table of RAID controllers. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
Syntax	ControllerEntry
Access	Not accessible
Index	`controllerNumber`

Table 3. Controller Number
Name	`controllerNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.1
Description	Identifies the instance number of the controller entry.
Syntax	Integer
Access	Read-only

Table 4. Controller Name
Name	`controllerName`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.2
Description	Identifies the name of the controller in this subsystem as represented in Storage Management. Includes the controller type and instance. For example: PERC 3/QC 1.
Syntax	DisplayString
Access	Read-only

Table 5. Controller Vendor
Name	`controllerVendor`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.3
Description	Identifies the controller's (re)seller's name.
Syntax	DisplayString
Access	Read-only

Table 6. Controller Type
Name	`controllerType`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.4
Description	Identifies the type of this controller: 1: SCSI 2: PowerVault 660F 3: Power Vault 662F 4: Integrated/Intelligent Drive Electronics (IDE) 5: Serial Advanced Technology Architecture (SATA) 6: Serial Attached SCSI (SAS) 9: PCIe SSD
Syntax	Integer
Access	Read-only

Table 7. Controller State
Name	`controllerState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.5
Description	Identifies the status of the controller's subsystem (which includes any devices connected to it). Possible states: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 6: Degraded
Syntax	Integer
Access	Read-only

Table 8. Controller Severity
Name	`controllerSeverity`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.6
Description	This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Syntax	Integer
Access	Read-only

Name	`controllerRebuildRateInPercent`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.7
Description	Identifies the percent of the compute cycles dedicated to rebuilding failed array disks.
Syntax	Integer
Access	Read-only

Table 9. Controller Firmware Version
Name	`controllerFWVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.8
Description	Identifies the controller's current firmware version.
Syntax	DisplayString
Access	Read-only

Table 10. Controller Cache Size in Megabytes
Name	`controllerCacheSizeInMB`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.9
Description	Identifies the controller's current amount of cache memory in megabytes. If this size is 0, it is less than a megabyte.
Syntax	Integer
Access	Read-only

Table 11. Controller Cache Size in Bytes
Name	`controllerCacheSizeInBytes`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.10
Description	Identifies the controller's current amount of cache memory that is less than a megabyte. This combined with the controllerCacheSizeInMB is the total amount of memory.
Syntax	Integer
Access	Read-only

Table 12. Controller Physical Device Count
Name	`controllerPhysicalDeviceCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.11
Description	Identifies the number of physical devices on the controller channel including both disks and the controller.
Syntax	Integer
Access	Read-only

Table 13. Controller Logical Device Count
Name	`controllerLogicalDeviceCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.12
Description	Identifies the number of virtual disks on the controller.
Syntax	Integer
Access	Read-only

Table 14. Controller Partner Status
Name	`controllerPartnerStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.13
Description	This entry is obsolete for Storage Management.
Syntax	DisplayString
Access	Read-only

Table 15. Controller Host Port Count
Name	`controllerHostPortCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.14
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 16. Controller Memory Size in Megabytes
Name	`controllerMemorySizeInMB`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.15
Description	Identifies the size of memory in megabytes on the controller. If this size is 0, it is less than a megabyte. This attribute is only supported on Adaptec controllers.
Syntax	Integer
Access	Read-only

Table 17. Controller Memory Size in Bytes
Name	`controllerMemorySizeInBytes`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.16
Description	Identifies the size of memory on the controller that is less than a megabyte. This combined with the controllerMemorySizeInMB is the total size of the memory. This attribute is only supported on Adaptec controllers.
Syntax	Integer
Access	Read-only

Table 18. Controller Drive Channel Count
Name	`controllerDriveChannelCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.17
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 19. Controller Fault Tolerant
Name	`controllerFaultTolerant`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.18
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 20. Controller C0 Port 0 World Wide Name
Name	`controllerC0Port0WorldWideName`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.19
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 21. Controller C0 Port 0 Name
Name	`controllerC0Port0Name`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.20
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 22. Controller C0 Port 0 ID
Name	`controllerC0Port0ID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.21
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 23. Controller C0 Target
Name	`controllerC0Target`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.22
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 24. Controller C0 Channel
Name	`controllerC0Channel`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.23
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 25. Controller C0 Operating System Controller
Name	`controllerC0OSController`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.24
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 26. Controller C0 Battery State
Name	`controllerC0BatteryState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.25
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 27. Controller C1 Port 0 World Wide Name
Name	`controllerC1Port0WWN`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.26
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 28. Controller C1 Port 0 Name
Name	`controllerC1Port0Name`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.27
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 29. Controller C1 Port 0 ID
Name	`controllerC1Port0ID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.28
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 30. Controller C1 Target
Name	`controllerC1Target`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.29
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 31. Controller C1 Channel
Name	`controllerC1Channel`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.30
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 32. Controller C1 Operating System Controller
Name	`controllerC1OSController`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.31
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 33. Controller Battery State C1
Name	`controllerC1BatteryState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.32
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 34. Controller Node World Wide Name
Name	`controllerNodeWWN`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.33
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 35. Controller C0 Port 1 World Wide Name
Name	`controllerC0Port1WWN`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.34
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 36. Controller C1 Port 1 World Wide Name
Name	`controllerC1Port1WWN`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.35
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 37. Controller Battery Charge Count
Name	`controllerBatteryChargeCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.36
Description	This entry is obsolete. Fibre channel is not supported in Storage Management.
Syntax	Integer
Access	Read-only

Table 38. Controller Roll-Up Status
Name	`controllerRollUpStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.37
Description	Indicates severity of the controller state. This is the combined status of the controller and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 39. Controller Component Status
Name	`controllerComponentStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.38
Description	Indicates the status of the controller itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 40. Controller Nexus ID
Name	`controllerNexusID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.39
Description	Durable unique ID for this controller.
Syntax	DisplayString
Access	Read-only

Table 41. Controller Alarm State
Name	`controllerAlarmState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.40
Description	Indicates state, or setting for the controller's alarm. Possible values: 1: Enabled 2: Disabled 3: Not Applicable
Syntax	Integer
Access	Read-only

Table 42. Controller Driver Version
Name	`controllerDriverVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.41
Description	Indicates currently installed driver version of the controller
Syntax	DisplayString
Access	Read-only

Table 43. Controller PCI Slot
Name	`controllerPCISlot`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.42
Description	Indicates the PCI slot number or embedded number for controllers on the motherboard
Syntax	DisplayString
Access	Read-only

Table 44. Controller Cluster Mode
Name	`controllerClusterMode`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.43
Description	Identifies if the controller is in cluster mode. Possible values: 1: Enabled 2: Disabled 3: Active (enabled and active) 99: Not Applicable
Syntax	Integer
Access	Read-only

Table 45. Controller Minimum Firmware Version
Name	`controllerMinFWVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.44
Description	The minimum firmware version for Storage Management to support the controller.
Syntax	DisplayString
Access	Read-only

Table 46. Controller Minimum Driver Version
Name	`controllerMinDriverVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.45
Description	The minimum driver version for Storage Management to support the controller.
Syntax	DisplayString
Access	Read-only

Table 47. Controller SCSI Initiator ID
Name	`controllerSCSIInitiatorID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.46
Description	The SCSI ID of the initiator.
Syntax	Integer
Access	Read-only

Table 48. Controller Channel Count
Name	`controllerChannelCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.47
Description	The number of channels on the controller.
Syntax	Integer
Access	Read-only

Table 49. Controller Reconstruct Rate
Name	`controllerReconstructRate`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.48
Description	The rate for reconstruct on the controller.
Syntax	Integer
Access	Read-only

Table 50. Controller Patrol Read Rate
Name	`controllerPatrolReadRate`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.49
Description	The rate for patrol read on the controller.
Syntax	Integer
Access	Read-only

Table 51. Controller BGI Rate
Name	`controllerBGIRate`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.50
Description	The rate for background initialization on the controller.
Syntax	Integer
Access	Read-only

Table 52. Controller Check Consistency Rate
Name	`controllerCheckConsistencyRate`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.51
Description	The rate for check consistency on the controller.
Syntax	Integer
Access	Read-only

Table 53. Controller Patrol Read Mode
Name	`controllerPatrolReadMode`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.52
Description	Identifies the patrol read mode. Possible values: 1: Automatic (enabled) 2: Manual (enabled) 3: Disabled
Syntax	Integer
Access	Read-only

Table 54. Controller Patrol Read State
Name	`controllerPatrolReadState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.53
Description	The state of the patrol read. Possible values: 1: Stopped - not running 2: Ready - ready to start 4: Active - is running 8: Aborted - has aborted
Syntax	Integer
Access	Read-only

Table 55. Controller Patrol Read Iterations
Name	`controllerPatrolReadIterations`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.54
Description	The number of times Patrol Read has been run on this controller.
Syntax	Integer
Access	Read-only

Table 56. Controller Storport Driver Version
Name	`controllerStorportDriverVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.55
Description	Provides current Windows OS storport driver version. Not applicable for Linux.
Syntax	Octet String
Access	Read-only

Table 57. Controller Minimum Required Storport Version
Name	`controllerMinimumRequiredStorportVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.56
Description	Provides minimum required storport driver version for Windows OS only.
Syntax	Octet String
Access	Read-only

Table 58. Controller Encryption Capable
Name	`controllerEncryptionCapable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.57
Description	Indicates encryption capability of the controller. Value: 1 - Capable, 99 - Not Applicable
Syntax	Integer
Access	Read-only

Name	`controllerEncryptionKeyPresent`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.58
Description	Indicates presence of encryption key for the controller. Value: 1 - Yes, 0 - No, 99 - Not Applicable
Syntax	Integer
Access	Read-only

Table 59. Controller Persistent Hot Spare
Name	`controllerPersistentHotSpare`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.59
Description	Indicates Persistent Hot Spare capability of the controller. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined /Not applicable
Syntax	Integer
Access	Read-only

Table 60. Controller Spin Down Unconfigured Drives
Name	`controllerSpinDownUnconfiguredDrives`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.60
Description	Indicates controller capability to put unconfigured drives in power save mode. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined /Not applicable
Syntax	Integer
Access	Read-only

Table 61. Controller Spin Down Hot Spare Drives
Name	`controllerSpinDownHotSpareDrives`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.61
Description	Indicates controller capability to put hot spare drives in power save mode. Value: 1 - Enabled, 0 - Disabled, 99 - Undetermined /Not applicable
Syntax	Integer
Access	Read-only

Table 62. Controller Spin Down Time Interval
Name	`controllerSpinDownTimeInterval`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.62
Description	Shows the duration in minutes after which, the unconfigured or hot spare drives is spun down to power save mode. Value: 30 to 1440 NOTE: A value of 9999 indicates that the feature is not available.
Syntax	Integer
Access	Read-only

Table 63. Controller Encryption Mode
Name	`controllerEncryptionMode`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.63
Description	Indicates the current encryption mode of the controller. Value: 0 - No Encryption, 1 - Local Key Management (LKM), 2 - Dell Key Management (DKM), 99 - Not Applicable
Syntax	Integer
Access	Read-only

Table 64. Controller CacheCade
Name	`controllerCacheCade`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.64
Description	Indicates if the controller is CacheCade capable or not. Value: 1 - Capable, 0 - Not Capable, 99 - Undetermined
Syntax	Integer
Access	Read-only

Table 65. Controller Spin Down Configured Drives
Name	`controllerSpinDownConfiguredDrives`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.65
Description	Indicates controller capability to spin down configured physical disks. Value: 0 - Disabled, 1 - Enabled, 99 - Undetermined
Syntax	Integer
Access	Read-only

Table 66. Controller Automatic Power Saving
Name	`controllerAutomaticPowerSaving`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.66
Description	Indicates controller capability for automatic power saving. Value: 0 - Disabled, 1 - Enabled, 99 - Undetermined
Syntax	Integer
Access	Read-only

Table 67. Controller Configured Drives SpinUp Time
Name	`controllerConfiguredDrivesSpinUpTime`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.67
Description	Indicates configured drives spin up start time. Value: 1:00 AM to 12:59 PM, 9999 - Undetermined
Syntax	DisplayString
Access	Read-only

Table 68. Controller Configured Drives SpinUp TimeInterval
Name	`controllerConfiguredDrivesSpinUpTimeInterval`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.68
Description	Indicates configured drives spin up time interval in hours. This value is added with configured drives start time to arrive at time window in which configured drives are always spin up. Value: 1 .. 24, 9999 - Undetermined
Syntax	Integer
Access	Read-only

Table 69. Controller Preserved Cache
Name	`controllerPreservedCache`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.69
Description	Indicates if preserved cache is present on the controller. Values: 1- Yes 0 - No 99 - Not available / Not applicable
Syntax	Integer
Access	Read-only

Table 70. Controller PI Enable
Name	`controllerPIEnable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.70
Description	Indicates if T10 PI is enabled on a controller. Values are: 0 : T10 PI disabled 1 : T10 PI enabled
Syntax	Integer
Access	Read-only

Table 71. Controller Current Mode
Name	`controllerCurrentMode`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.1.1.71
Description	Indicates the current controller mode.
Syntax	DisplayString
Access	Read-only