Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits

Dell PowerVault ME4 Series Storage System Administrator’s Guide

Rear view

The Rear tab shows the rear of all enclosures in a graphical view.

The rear view shows enclosure IDs and the presence or absence of power supplies, controller modules, and expansion modules. It also shows controller module IDs, host port types and names, network port IP addresses, and expansion port names.

To see more information, hover the cursor over an enclosure ear or a component. To illuminate a locator LED for any of the components, select one or more components and click Turn On LEDs. To turn off individual locator LEDs, select the components and click Turn Off LEDs. To turn off all locator LEDs, ensure that no components are selected and click Turn Off LEDs. For a 5U84 enclosure, only enclosures, I/O modules, and disks are selectable.

NOTE:Protocol-specific properties are displayed only for host ports that use those protocols.
Table 1. Additional information panels for the rear view of the enclosureAdditional information panels for the rear view of the enclosure
Panel Information displayed
Enclosure Information ID, status, vendor, model, disk count, WWN, midplane serial number, revision, part number, manufacturing date, manufacturing location, EMP A revision, EMP B revision, EMP A bus ID, EMP B bus ID, EMP A target ID, EMP B target ID, midplane type, enclosure power (watts), PCIe 2-capable, health
Power Supply Information Status, vendor, model, serial number, revision, location, part number, manufacturing date, manufacturing location, health
Controller Information ID, IP address, description, status, model, serial number, hardware version, system cache memory (MB), revision, CPLD version, Storage Controller code version, Storage Controller CPU type, part number, position, hardware version, manufacturing date, manufacturing location, health
Port Information (FC) Name, type, ID (WWN), status, configured speed, actual speed, topology, primary loop ID, supported speeds, SFP status, part number, health
Port Information (iSCSI) Name, type, ID (IQN), status, configured speed, actual speed, IP version, MAC address, address, gateway, netmask, SFP status, part number, 10G compliance, cable length, cable technology, Ethernet compliance, health
Port Information (SAS) Name, type, ID (WWN), status, actual speed, topology, expected lanes, active lanes, disabled lanes, health
Network Information Name, mode, IP address, network mask, gateway, MAC address, health
Expansion Port Information Enclosure ID, controller ID, name, status, health
Expansion Module Information (IOM) ID, description, serial number, revision, health

If the health of a component is not OK, the health reason, recommended action, and unhealthy subcomponents are shown to help you resolve problems.


Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\