Passer au contenu principal
Quitter

Bienvenue dans l’univers Dell

Mon compte
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.
Se connecter Créer un compte Connexion au compte Premier Connexion au programme de partenariat

Vos paniers Dell.com

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Display the Logging Buffer and the Logging Configuration

To display the current contents of the logging buffer and the logging settings for the system, use the show logging command in EXEC privilege mode. When RBAC is enabled, the security logs are filtered based on the user roles. Only the security administrator and the system administrator can view the security logs.

Example of the show logging Command 

Dell#show logging
                                 syslog logging: enabled
                                 Console logging: level Debugging
                                 Monitor logging: level Debugging
                                 Buffer logging: level Debugging, 40 Messages Logged, Size (40960 bytes)
                                 Trap logging: level Informational
                                 %IRC-6-IRC_COMMUP: Link to peer RPM is up
                                 %RAM-6-RAM_TASK: RPM1 is transitioning to Primary RPM.
                                 %RPM-2-MSG:CP1 %POLLMGR-2-MMC_STATE: External flash disk missing in 'slot0:'
                                 %CHMGR-5-CARDDETECTED: Line card 0 present
                                 %CHMGR-5-CARDDETECTED: Line card 2 present
                                 %CHMGR-5-CARDDETECTED: Line card 4 present
                                 %CHMGR-5-CARDDETECTED: Line card 5 present
                                 %CHMGR-5-CARDDETECTED: Line card 8 present
                                 %CHMGR-5-CARDDETECTED: Line card 10 present
                                 %CHMGR-5-CARDDETECTED: Line card 12 present
                                 %TSM-6-SFM_DISCOVERY: Found SFM 0
                                 %TSM-6-SFM_DISCOVERY: Found SFM 1
                                 %TSM-6-SFM_DISCOVERY: Found SFM 2
                                 %TSM-6-SFM_DISCOVERY: Found SFM 3
                                 %TSM-6-SFM_DISCOVERY: Found SFM 4
                                 %TSM-6-SFM_DISCOVERY: Found SFM 5
                                 %TSM-6-SFM_DISCOVERY: Found SFM 6
                                 %TSM-6-SFM_DISCOVERY: Found SFM 7
                                 %TSM-6-SFM_SWITCHFAB_STATE: Switch Fabric: UP
                                 %TSM-6-SFM_DISCOVERY: Found SFM 8
                                 %TSM-6-SFM_DISCOVERY: Found 9 SFMs
                                 %CHMGR-5-CHECKIN: Checkin from line card 5 (type EX1YB, 1 ports)
                                 %TSM-6-PORT_CONFIG: Port link status for LC 5 => portpipe 0: OK portpipe 1: N/A
                                 %CHMGR-5-LINECARDUP: Line card 5 is up
                                 %CHMGR-5-CHECKIN: Checkin from line card 12 (type S12YC12, 12 ports)
                                 %TSM-6-PORT_CONFIG: Port link status for LC 12 => portpipe 0: OK portpipe 1: N/A
                                 %CHMGR-5-LINECARDUP: Line card 12 is up
                                 %IFMGR-5-CSTATE_UP: changed interface Physical state to up: So 12/8
                                 %IFMGR-5-CSTATE_DN: changed interface Physical state to down: So 12/8

To view any changes made, use the show running-config logging command in EXEC privilege mode, as shown in the example for Configuring a UNIX Logging Facility Level.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\