Passer au contenu principal
Quitter

Bienvenue dans l’univers Dell

Mon compte
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.
Se connecter Créer un compte Connexion au compte Premier Connexion au programme de partenariat

Vos paniers Dell.com

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Setting Daylight Saving Time Once

Set a date (and time zone) on which to convert the switch to daylight saving time on a one-time basis.

To set the clock for daylight savings time once, use the following command.
Set the clock to the appropriate timezone and daylight saving time. CONFIGURATION mode clock summer-time time-zone date start-month start-day start-year start-time end-month end-day end-year end-time [ offset]
  • time-zone : Enter the three-letter name for the time zone. This name displays in the show clock output.
  • start-month : Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year.
  • start-day : enter the number of the day. The range is from 1 to 31. You can enter the name of a month to change the order of the display to time day month year.
  • start-year : enter a four-digit number as the year. The range is from 1993 to 2035.
  • start-time : enter the time in hours:minutes. For the hour variable, use the 24-hour format; example, 17:15 is 5:15 pm.
  • end-month : enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year.
  • end-day : enter the number of the day. The range is from 1 to 31. You can enter the name of a month to change the order of the display to time day month year.
  • end-year : enter a four-digit number as the year. The range is from 1993 to 2035.
  • end-time : enter the time in hours:minutes. For the hour variable, use the 24-hour format; example, 17:15 is 5:15 pm.
  • offset : (OPTIONAL) enter the number of minutes to add during the summer-time period. The range is from 1 to 1440. The default is 60 minutes.

Example of the clock summer-time Command 

Dell(conf)#clock summer-time pacific date Mar 14 2012 00:00 Nov 7 2012 00:00
                                 Dell(conf)#

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\