Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

Example of Viewing PIM-SM Interfaces

To display which interfaces are enabled with PIM-SM, use the show ip pim interface command from EXEC Privilege mode.

Dell#show ip pim interface
                                 Address    Interface VIFindex Ver/  Nbr   Query DR  DR
                                 Mode  Count Intvl Prio
                                 189.87.5.6  Gi 4/11  0x2      v2/S  1     30    1   127.87.5.6
                                 189.87.3.2  Gi 4/12  0x3      v2/S  1     30    1   127.87.3.5
                                 189.87.31.6 Gi 7/11  0x0      v2/S  0     30    1   127.87.31.6
                                 189.87.50.6 Gi 7/13  0x4      v2/S  1     30    1   127.87.50.6
                                 Dell#
                              

To display PIM neighbors for each interface, use the show ip pim neighbor command EXEC Privilege mode.

Dell#show ip pim neighbor
                                 Neighbor     Interface Uptime/Expires     Ver  DR
                                 Address                                        Prio/Mode
                                 127.87.5.5   Gi 4/11   01:44:59/00:01:16  v2   1 / S
                                 127.87.3.5   Gi 4/12   01:45:00/00:01:16  v2   1 / DR
                                 127.87.50.5  Gi 7/13   00:03:08/00:01:37  v2   1 / S
                                 Dell#
                              

To display the PIM routing table, use the show ip pim tib command from EXEC privilege mode.

Dell#show ip pim tib
                                 
                                 PIM Multicast Routing Table
                                 Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned,
                                 R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT,
                                 Timers: Uptime/Expires
                                 Interface state: Interface, next-Hop, State/Mode
                                 
                                 (*, 192.1.2.1), uptime 00:29:36, expires 00:03:26, RP 10.87.2.6, flags: SCJ
                                 Incoming interface: GigabitEthernet 4/12, RPF neighbor 10.87.3.5
                                 Outgoing interface list:
                                 GigabitEthernet 4/11
                                 GigabitEthernet 7/13
                                 
                                 (10.87.31.5, 192.1.2.1), uptime 00:01:24, expires 00:02:26, flags: FT
                                 Incoming interface: GigabitEthernet 7/11, RPF neighbor 0.0.0.0
                                 Outgoing interface list:
                                 GigabitEthernet 4/11
                                 GigabitEthernet 4/12
                                 GigabitEthernet 7/13
                                 --More--