- Notes, cautions, and warnings
- Working on your computer
- Disassembly and reassembly
- M.2 Intel Optane Memory Module 16 GB
- Technology and components
- BIOS setup
- Software
- Troubleshooting your computer
- Power-Supply Unit Built-in Self-Test
- Dell SupportAssist Pre-boot System Performance Check diagnostics
- Diagnostic and Power LED codes
- Power LED issue
- Diagnostic error messages
- Verifying system memory
- System error messages
- Recovering the operating system
- Real-Time Clock (RTC Reset)
- Backup media and recovery options
- Wi-Fi power cycle
- Technical specifications
- Getting help and contacting Dell
OptiPlex 7050 Micro Owner's Manual
Removing 2.5–inch drive assembly
Steps
- Follow the procedure in Before working inside your computer.
- Remove the cover.
- To remove the drive assembly:
- Press the blue tabs on both sides of the drive assembly [1].
- Push the drive assembly to release it from the computer [2].
- Remove the drive assembly from the computer
[3].
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
この記事は役に立ちましたか?
コメントでは、以下の特殊文字は利用できません: <>()\