メイン コンテンツに進む
  • すばやく簡単にご注文が可能
  • 注文内容の表示、配送状況をトラック
  • 会員限定の特典や割引のご利用
  • 製品リストの作成とアクセスが可能
  • 「Company Administration(会社情報の管理)」では、お使いのDell EMCのサイトや製品、製品レベルでのコンタクト先に関する情報を管理できます。

Dell PowerEdge T20 Owner's Manual

Troubleshooting Expansion Cards

  • CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  • NOTE: When troubleshooting an expansion card, see the documentation for your operating system and the expansion card.
  1. Run the appropriate diagnostic test. For more information, see Using System Diagnostics.
  2. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
  3. Open the system.
  4. Ensure that each expansion card is firmly seated in its connector.
  5. Close the system.
  6. If the problem is not resolved, turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
  7. Open the system.
  8. Remove all expansion cards installed in the system.
  9. Close the system.
  10. Run the appropriate diagnostic test. For more information, see Using System Diagnostics.

    If the tests fail, see Getting Help.

  11. For each expansion card you removed in step 8, perform the following steps:
    1. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
    2. Open the system.
    3. Reinstall one of the expansion cards.
    4. Close the system.
    5. Run the appropriate diagnostic test. For more information, see Using System Diagnostics.

If a problem is still indicated, see Getting Help.


このコンテンツを評価する

正確
有益
分かりやすい
この記事は役に立ちましたか?
0/3000 characters
  1~5個の星の数で評価してください。
  1~5個の星の数で評価してください。
  1~5個の星の数で評価してください。
  この記事は役に立ちましたか?
  コメントでは、以下の特殊文字は利用できません: <>()\