- Notes, cautions, and warnings
- Additional Resources
- Introduction
- Import requirements and restrictions
- General requirements for importing data
- Dell EqualLogic PS Series specific requirements
- Dell Compellent SC Series specific requirements
- Dell Unity specific requirements
- Dell VNX2 Series specific requirements
- Dell XtremIO XI and X2 specific requirements
- Dell PowerMax and VMAX3 specific requirements
- NetApp AFF and A Series specific requirements
- General block-based import restrictions
- General file-based import restrictions
- Host plugin installation (block-based non-disruptive import only)
- Installing the host plugin for import on a Windows-based host
- Installing the host plugin for import on a Linux-based host
- Installing the Dell EqualLogic MEM kit on an ESXi-based host
- Install the Dell EqualLogic MEM kit on an ESXi-based host using the vSphere CLI
- Install the Dell EqualLogic MEM kit on an ESXi-based host using setup.pl script on VMA
- Install the Dell EqualLogic MEM kit on an ESXi-based host using VUM
- Install the Dell EqualLogic MEM kit during an ESXi-based host upgrade
- Uninstalling the host plugin for import
- Import workflows
- Non-disruptive import workflow
- Cutover workflow for non-disruptive import
- Cancel workflow for non-disruptive import
- Agentless import workflow
- Cutover workflow for agentless import
- Cancel workflow for agentless import
- File-based import workflow
- Cutover workflow for file-based import
- Cancel workflow for file-based import
- Configuring and managing import
- Configure a non-disruptive import
- Refresh hosts and volumes in a non-disruptive import
- Manage non-disruptive import sessions
- Configure an agentless import
- Manage agentless import sessions
- Configure a File Mobility Network for file-based import
- Configure the connection to a remote system for file-based import
- Configure file import interface
- Configure a file-based import
- Manage file-based import sessions
- Import-CLI (Linux)
- Additional tasks related to import for Linux-based hosts
- ImportKit-CLI (Windows)
- How to run the ImportKit CLI commands
- List supported arrays
- Host plugin log information
- Import kit version
- Restart import kit host plugin service
- Import volumes information
- Get Web server port information
- Install import kit certificate
- Re-generate the import kit certificate
- Set Web server port information
- Set host plugin logging debug log level
- Import-CLI (VMware)
- CLI for EQL MPIO
- Fault handling by PowerStore import
Dell PowerStore Importing External Storage to PowerStore Guide
Cancel workflow for non-disruptive import
You can cancel an import session that is in any one of the following states:
- Queued
- Scheduled
- For volume, Copy-in-Progress or, for CG, In-Progress
- Paused
- Ready-for-Cutover
- For CG, Import-Cutover-Incomplete
- For CG, Cancel-Required
- For CG, Cancel-Failed
- For CG, Failed
The cancel operation sets the state of the import session to CANCELLED and disables access to the destination volume or volume group. It also deletes the destination volume or volume group associated with the import session.
NOTE:After an import session is successfully cancelled, wait five minutes before retrying to import the same volume or consistency group. If you retry the import immediately after the successful cancel operation, the import may fail.
NOTE:A
Force Stop option is provided in the confirmation popup for Cancel in the case of either a source system or a host is down. Selecting this option terminates the import session without rolling back access to the volumes on the source system. Manual intervention may be required on the source system or host, or both.
The following steps show the manual cancel workflow in PowerStore Manager:
- Select the import session to cancel.
- Select the Cancel import action to cancel the import session.
- Click
CANCEL THE IMPORT in the pop up screen. The following cancel processing occurs:
- The destination volume is disabled.
- The source volume is enabled.
- The state of the import session is set to
CANCELLED on the successful completion of the operation.
NOTE:When all the volumes in a volume group are cancelled successfully, the state of the import session is set to CANCELLED. However, since the status of the volume group is dependent on the final status of the member volumes, if one or more of the member volumes are in a state other than CANCELLED, the status of the volume group is set to Cancel_Failed. You must repeat the cancel operation again until it succeeds and the status for the volume group becomes CANCELLED.
- The destination volume is deleted.
NOTE:Import sessions are not deleted but can be deleted through the REST API.
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
1～5個の星の数で評価してください。
この記事は役に立ちましたか?
コメントでは、以下の特殊文字は利用できません: <>()\