Dell Vostro 3650 Owner's Manual

System Setup Options

Table 1. — Main
System Time	Displays the system time. Allows you to reset the time on the computer’s internal clock.
System Date	Displays the system date. Allows you to reset the date on the computer’s internal calendar.
BIOS Version	Displays the BIOS revision.
Product Name	Displays the computer model number.
Service Tag	Displays the service tag of your computer.
Asset Tag	Displays the asset tag of your computer (if available).
CPU Type	Displays the type of processor.
CPU Speed	Displays the speed of the processor
CPU ID	Displays the processor ID
CPU Cache	Displays the L1, L2, and L3 cache size of the processor.
HDD0	Displays the HDD0 size of the computer.
HDD1	Displays the HDD1 size of the computer.
HDD2	Displays the HDD2 size of the computer.
HDD3	Displays the HDD3 size of the computer.
System Memory	Displays the size of the memory installed.
Memory Speed	Displays the speed of the memory installed.

Table 2. — Advanced
Intel (R) SpeedStep (TM)	Allows you to enable or disable the Intel SpeedStep technology. Default: Enabled
Virtualization	Allows you to enable or disable the virtualization feature. Default: Enabled
VT for Direct I/O	Allows you to enable or disable the VT for direct I/O. Default: Enabled
Trusted Execution	Allows you to enable or disable the trusted execution. Default: Disabled
Integrated NIC	Allows you to enable to disable the integrated network Default: Enabled
SATA Operation	Allows you to change the SATA mode Default: AHCI
Intel Multi-Display	Allows you to enable or disable the multi-display feature. Default: disabled
USB Emulation	Allows you to enable or disable the USB emulation. Default: Enabled
SW Guard Extensions (SGX)	Allows you to enable or disable the SW guard extensions (SGX). Default: Disabled
USB Configuration	Allows you to enable or disable the USB ports. Front USB Ports: Enabled Rear USB Ports: Enabled
Power Options	Allows you to modify the power options. Wake up by Integrated LAN/WLAN: Disabled AC Recovery: Power Off Deep Sleep Control: Enabled in S4 and S5 modes Auto Power On: Disabled Auto Power On Mode: Allows you to select the day (Default: disabled) Auto Power On Date: Allows you to select the date Auto Power On Time: Allows you to select the time
SMART Settings	Allows you to enable to enable or disable the SMART feature. Default: Disabled

Table 3. — Security
Unlock Setup Status	Allows you to lock or unlock the system setup. Default: Unlocked
Admin Password Status	Displays the status indicating if the Administrator password is set. Default: Not Set
System Password Status	Displays the status indicating if the System password is set. Default: Not Set
HDD Password Status	Displays the status indicating if the System password is set. Default: Not Set
Asset Tag	Allows you to enter your service tag.
Admin Password	Allows you to create an admin password.
HDD Password	Allows you to create an HDD password.
System Password	Allows you to create a system password.
Password Change	Allows you to set the option to change password. Default: Permitted
Firmware TPM	Allows you to enable or disable the Firmware TPM. Default: Disabled
HDD Protection	Allows to modify the HDD protection feature. Default: Disabled

Table 4. — Boot
Boot List Option	Displays the boot modes Default: UEFI File Browser Add Boot Option and File Browser Del Boot Option are actiavted
Secure Boot	Allows you to enable or disable the Secure Boot control. Default: Enabled
Legacy Option ROMs	Allows you to load the legacy option ROMs. Default: Disabled
Boot Option Priorities	Enables you to change the boot option priorities.

Table 5. — Exit
Save Changes and Reset	Allows to save or rest the changes made to the system setup. Allows you to discard the changes made to the system setup. Allows you to restore the system setup options to default. Allows you to discard the changes made to the system setup. Allows you to save the changes made to the system setup.