Integrated Dell Remote Access Controller 9 Version 3.15.15.15 User's Guide

PDF

Configuring IPMI over LAN using RACADM

Enable IPMI over LAN.
```
racadm set iDRAC.IPMILan.Enable 1
```
NOTE:This setting determines the IPMI commands that are executed using IPMI over LAN interface. For more information, see the IPMI 2.0 specifications at intel.com.
Update the IPMI channel privileges.
```
racadm set iDRAC.IPMILan.PrivLimit <level>
```
Parameter Privilege level
<level> = 2 User
<level> = 3 Operator
<level> = 4 Administrator
Set the IPMI LAN channel encryption key ,if required.
```
racadm set iDRAC.IPMILan.EncryptionKey <key>
```
Parameter Description
<key> 20-character encryption key in a valid hexadecimal format.

NOTE:The iDRAC IPMI supports the RMCP+ protocol. For more information, see the IPMI 2.0 specifications at intel.com.