Integrated Dell Remote Access Controller 9 Version 3.15.15.15 User's Guide

Updating firmware using remote RACADM

1. Download the firmware image to the TFTP or FTP server. For example, C:\downloads\firmimg.d9
2. Run the following RACADM command:
   TFTP server:

   • Using fwupdate command:

     racadm -r <iDRAC IP address> -u <username> -p <password> fwupdate -g -u -a <path>

     path

     the location on the TFTP server where firmimg.d9 is stored.

   • Using update command:

     racadm -r <iDRAC IP address> -u <username> -p <password> update —f <filename>

   FTP server:

   • Using fwupdate command:

     racadm -r <iDRAC IP address> -u <username> -p <password> fwupdate –f <ftpserver IP> <ftpserver username> <ftpserver password> –d <path>

     path

     the location on the FTP server where firmimg.d9 is stored.

   • Using update command:

     racadm -r <iDRAC IP address> -u <username> -p <password> update —f <filename>

   For more information, see the iDRAC RACADM Command Line Interface Reference Guide available at dell.com/idracmanuals.