Integrated Dell Remote Access Controller 9 Version 3.15.15.15 User's Guide

Disabling access to modify iDRAC configuration settings on host system

1. In iDRAC Web interface, go to iDRAC Settings > Services > Local Configurations.
2. Select one or both of the following:
   • Disable the iDRAC Local Configuration using iDRAC Settings — Disables access to modify the configuration settings in iDRAC Settings utility.
   • Disable the iDRAC Local Configuration using RACADM — Disables access to modify the configuration settings in Local RACADM.
3. Click Apply.
   NOTE:If access is disabled, you cannot use Server Administrator or IPMITool to perform iDRAC configurations. However, you can use IPMI Over LAN.