omreport |
modularenclosure |
|
U, P, A |
Displays the information for all the modular chassis. |
|
about |
|
U, P, A |
Displays the version number and properties for Server Administrator. |
|
|
details=true |
U, P, A |
Displays the information for all the Server Administrator programs
installed.
|
|
chassis or mainsystem |
|
U, P, A |
Displays the general status of all the main components. |
|
|
acswitch |
U, P, A |
Displays the failover settings where redundant AC power lines
are supported in a system.
|
|
|
batteries |
U, P, A |
Displays the properties set for batteries. |
|
|
bios |
U, P, A |
Displays the BIOS information such as manufacturer, version,
and release date.
|
|
|
biossetup |
A |
Displays the BIOS setup properties configured during system
boot.
|
|
|
fans |
U, P, A |
Displays the status and thresholds for system fans. |
|
|
firmware |
U, P, A |
Displays the name and version of the firmware. |
|
|
frontpanel |
U, P, A |
Displays whether the front panel button settings, such as the
Power button and/or
Nonmasking Interrupt (NMI) button (if present on the system), are enabled or disabled.
It also displays the front panel encryption access information and
the front panel LCD information.
|
|
|
fru |
U, P, A |
Displays the Field Replaceable Unit (FRU) information. |
|
|
hwperformance |
U, P, A |
Displays the status and cause for the system’s performance
degradation.
|
|
|
info |
U, P, A |
Displays a status summary for main system chassis components. |
|
|
intrusion |
U, P, A |
Displays the status of the system’s intrusion sensor(s). |
|
|
leds |
U, P, A |
Displays the properties you have set for light-emitting diodes
to flash under various alert conditions.
|
|
|
memory |
U, P, A |
Displays properties of the system's memory arrays. |
|
|
nics |
U, P, A |
Displays the NIC and Team interface properties. |
|
|
ports |
U, P, A |
Displays the properties for the system’s parallel and serial
ports, such as I/O address, IRQ level, connector type, and maximum
speed.
|
|
|
processors |
U, P, A |
Displays properties of the system’s processors, including speed,
manufacturer, and processor family.
|
|
|
pwrmanagement |
U, P, A |
Displays power inventory details such as system idle power,
system maximum potential power, and power budget information.
|
|
|
pwrmonitoring |
U, P, A |
Displays properties of power consumption. |
|
|
pwrsupplies |
U, P, A |
Displays the properties of power supplies. |
|
|
remoteaccess |
U, P, A |
Displays general information on remote access. |
|
|
slots |
U, P, A |
Displays the properties of the system’s expansion slots and
other slot types.
|
|
|
temps |
U, P, A |
Displays the status and thresholds for the system temperature
sensors.
|
|
|
volts |
U, P, A |
Displays the status and thresholds for the system voltage sensors. |
|
|
removableflashmedia |
U, P, A |
Displays the system’s virtual flash (vFlash) and secure digital
(SD) card details.
|
|
licenses |
|
U, P, A |
Displays the digital licenses of the installed hardware devices
of the system.
|
|
storage |
|
U, P, A |
See
Using The Storage Management Service.
|
|
system or servermodule |
|
U, P, A |
Displays a high-level summary of system components. |
|
|
alertaction |
U, P, A |
Displays the warning and failure threshold values, as well
as actions configured when an essential component detects a warning
or failure state.
|
|
|
alertlog |
U, P, A |
Allows the administrator to display the alert log. |
|
|
assetinfo |
U, P, A |
Displays the cost of ownership information for the system. |
|
|
cmdlog |
U, P, A |
Allows the administrator to display the command log. |
|
|
esmlog |
U, P, A |
Allows the administrator to display the hardware log. |
|
|
events |
U, P, A |
Displays the system’s Simple Network Management Protocol (SNMP)
event settings.
|
|
|
operatingsystem |
U, P, A |
Displays the name and version of the operating system. |
|
|
pedestinations |
U, P, A |
Displays the destinations to send the configured alerts for
platform events.
|
|
|
platformevents |
U, P, A |
Displays the system’s response for each listed platform event |
|
|
recovery |
P, A |
Displays how the system is configured to respond to a hung
operating system.
|
|
|
shutdown |
P, A |
Displays how to perform the shutdown action. |
|
|
summary |
U, P, A |
Displays the key facts for all system components, including
main system chassis, software, and storage.
|
|
|
thrmshutdown |
P, A |
Displays how to perform the shutdown action, if any, when a
temperature warning or failure condition is detected.
|
|
|
version |
U, P, A |
Displays a summary for all updatable components on the system. |
|
preferences |
webserver |
U, P, A |
Displays the URL information of the Server Administrator Web
server.
|
|
|
messages |
A |
Displays the configured alert message format. |