Return\Error Codes | Description | Resolution |
---|---|---|
0 | Command execution was successful | NA |
1 | A reboot was required from the execution of an operation | Reboot the system to complete the operation. |
2 | An unknown application error has occurred | NA |
3 | The current system manufacturer is not Dell | Dell Command | Update can only be run on Dell systems. |
4 | The CLI was not launched with administrative privilege | Invoke the Dell Command | Update CLI with administrative privileges. |
5 | A reboot was pending from a previous operation | Reboot the system to complete the operation. |
6 | Another instance of the same application (UI or CLI) is already running. | Close any running instance of Dell Command | Update UI or CLI and retry the operation. |
7 | The application does not support the current system model | Contact your administrator if the current system model in not supported by the catalog. |
8 | No update filters have been applied or configured | Supply at least one update filter. |
Return\Error Codes | Description | Resolution |
---|---|---|
100 | While evaluating the command line parameters, no parameters were detected | A command must be specified on the command line. |
101 | While evaluating the command line parameters, no commands were detected | Provide a valid command and options. Refer Command line interface reference section, for more information. |
102 | While evaluating the command line parameters, invalid commands were detected | Provide a command along with the supported options for that command. Refer Command line interface reference section, for more information. |
103 | While evaluating the command line parameters, duplicate commands were detected | Remove any duplicate commands and re-run the command. Refer Command line interface reference section, for more information. |
104 | While evaluating the command line parameters, the command syntax was incorrect | Make sure to follow the command syntax '/<command name>'. Refer Command line interface reference section, for more information. |
105 | While evaluating the command line parameters, the option syntax was incorrect | Make sure to follow the option syntax '-<option name>'. Refer Command line interface reference section, for more information. |
106 | While evaluating the command line parameters, invalid options were detected | Make sure to provide all required or only supported options. Refer Command line interface reference section, for more information. |
107 | While evaluating the command line parameters, the value(s) provided to the specific option was invalid | Provide an acceptable value. Refer Command line interface reference section, for more information. |
108 | While evaluating the command line parameters, all mandatory options were not detected | If an command requires mandatory options to execute, please provide them. Refer Command line interface reference section, for more information. |
109 | While evaluating the command line parameters, invalid combination of options were detected | Remove any mutually exclusive options and rerun the command. Refer Command line interface reference section, for more information. |
110 | While evaluating the command line parameters, multiple commands were detected | With the exception of /help and /version, only one command can be specified in the command line. |
111 | While evaluating the command line parameters, duplicate options were detected | Remove any duplicate options and re-run the command. Refer Command line interface reference section, for more information. |
112 | Invalid catalog was detected | Make sure the file path provided exists, had a valid extension type, is a valid SMB, UNC or URL, does not have invalid characters, does not exceed 255 characters and have required permissions. Refer Command line interface reference section, for more information. |
Return\Error Codes | Description | Resolution |
---|---|---|
500 | No updates were found for the system when a scan operation was executed | The system is upto date or no updates were found for the provided filters. Modify the filters and re-run the commands. |
501 | An error occurred while determining the available updates for the system, when a scan operation was executed | Retry the operation. |
502 | The cancellation was initiated, Hence, the scan operation is cancelled | Retry the operation. |
503 | An error occurred while downloading a file during the scan operation | Check your network connection, make sure there is internet connectivity and Retry the command. |
Return\Error Codes | Description | Resolution |
---|---|---|
1000 | An error occurred when retrieving the result of the apply updates operation | Retry the operation. |
1001 |
The cancellation was initiated, Hence, the Apply updates operation is canceled |
Retry the operation. |
1002 | An error occurred while downloading a file during the apply updates operation | Check your network connection, make sure there is internet connectivity and Retry the command. |
Return\Error Codes | Description | Resolution |
---|---|---|
1500 | An error occurred while exporting the application settings | Verify the folder exists or have permissions to write to the folder. |
Return\Error Codes | Description | Resolution |
---|---|---|
2000 | An error occurred when retrieving the result of the Advanced Driver Restore operation | Retry the operation. |
2001 | The Advanced Driver Restore process failed | Retry the operation. |
2002 | Multiple diver cab's were provided for Advanced Driver Restore operation | Make sure to provide only one driver cab file. |
2003 | An invalid path for the driver cab was provided as in input for the driver install command | Make sure the file path provided exists, had a valid extension type, is a valid SMB, UNC or URL, does not have invalid characters, does not exceed 255 characters and have required permissions. Refer Command line interface reference section, for more information. |
2004 | The cancellation was initiated, Hence, the driver install operation is cancelled | Retry the operation. |
2005 | An error occurred while downloading a file during the driver install operation | Check your network connection, make sure there is internet connectivity and Retry the command. |
Return\Error Codes | Description | Resolution |
---|---|---|
2500 | An error occurred while encrypting the password during the generate encrypted password operation | Retry the operation. |
2501 | An error occured while encrypting the password with the encryption key provided | Provide a valid encryption key and Retry the operation. Refer Command line interface reference section, for more information. |
2502 | The encrypted password provided does not match the current encryption method | The provided encrypted password used an older encryption method, please re-encrypt the password. |
Return\Error Codes | Description | Resolution |
---|---|---|
3000 | The Dell Client Management Service is not running | Start the Dell Client Management Service in the Windows services if stopped. |
3001 | The Dell Client Management Service is not installed | Download and install the Dell Client Management Service from the Dell support site. |
3002 | The Dell Client Management Service is disabled | Enable the Dell Client Management Service from Windows services if disabled. |