Przejdź do głównej zawartości
  • Szybkie i łatwe składanie zamówień
  • Wyświetlanie zamówień i śledzenie stanu wysyłki
  • Tworzenie i dostęp do listy produktów
  • Na firmowej stronie administracji możesz zarządzać witrynami, produktami i danymi kontaktowymi firmy Dell EMC.

Alienware m17 Service Manual

Procedure

NOTE Ensure that the display assembly is placed on a clean and flat surface.
  1. Remove the four screws (M2x3) that secure the display panel to the display back-cover and antenna assembly.
  2. Gently lift the display panel and turn it over.
    Image: Removing the display panel
  3. Peel the tape that secures the display-cable connector latch to the display panel.
  4. Open the latch and disconnect the display cable from the display panel.
  5. Lift the display panel from the display back-cover and antenna assembly.
    Image: Removing the display panel
    After performing all the steps you are left with the display panel.

    Image: Removing the display panel


Oceń tę zawartość

Trafne
Przydatne
Łatwe do zrozumienia
Czy ten artykuł był przydatny?
0/3000 characters
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Określ, czy artykuł były przydatny, czy nie.
  Komentarze nie mogą zawierać znaków specjalnych: <>()\