Alerts and actions can be set for certain events that occur on
a managed system. An event occurs when the status of a system component
has changed to the predefined condition. If an event matches an event
filter and this filter is configured to generate an alert (email,
SNMP trap, or IPMI alert), an alert is sent to one or more configured destinations. If
the same event filter is also configured to perform an action (such
as reboot, power cycle, or power off the system), the action is performed.
You can set only one action for an event.
Nie ma danych dotyczących tematu
Podaj ocenę (od 1 do 5 gwiazdek).
Podaj ocenę (od 1 do 5 gwiazdek).
Podaj ocenę (od 1 do 5 gwiazdek).
Określ, czy artykuł były przydatny, czy nie.
Komentarze nie mogą zawierać znaków specjalnych: <>()\