Dell Wyse ThinLinux 1.0.3 INI Guide

NetworkPrinter

The following table contains the supported options you can use for the NetworkPrinter parameter default values are in bold:.

Table 1. NetworkPrinter Parameter Options
Options	Description
Default={yes ,no}	Default is yes
Description=<string>	Not used internally.
Enable={yes, no}	Default is yes
Host=<host address>	It provides host of the printer server.
ModelID=<linux driver name>	Identifies the printer for the purpose of choosing a Linux printer driver. For example, Dell B5465dnf Laser MFP.
Name=<printer name>	It provides both the name that is given in the local printers list and the internal name of the local print queue. The name must be between 1 and 16 characters, starting with a letter and composed entirely of letters, digits, underscores, and dashes. NOTE: This parameter is mandatory
PPD=<PPD name>	It directly specifies a Postscript Printer Definition filename for use, as a local printer driver.
PrinterID=<Windows driver>	Identifies the printer for the purpose of choosing a Windows printer driver. For example, Brother MFC-420CN Printer. Specify this parameter if you are forwarding the printer access to a Citirx or RDESKTOP connection.
Queue=<printer queue>	It provides printer queue on the server.