Pular para o conteúdo principal
Sair

Boas-vindas à Dell

Minha conta
  • Faça pedidos de forma rápida e simples
  • Visualize os pedidos e acompanhe o status de envio
  • Crie e acesse uma lista dos seus produtos
  • Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.
Login Crie sua conta Premier login Inscrição no programa de parceria
Fale Conosco

Seus carrinhos no Dell.com

Dell PowerEdge C4130 Owner's Manual

PDF

Removing the custom GPU brackets from the GPUs removed from your system

The Nvidia, Intel, or AMD brackets are installed on the Nvidia, Intel, or AMD GPUs shipped with your system. These brackets should be removed from the Nvidia, Intel, or AMD GPUs removed from your system and installed on the replacement GPUs.

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dell certified service technicians.

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Keep the Philips #1 and #2 screwdrivers ready.
  3. Remove the GPU riser cable board.

NOTE: Depending on the type of Nvidia GPUs supported on your system, the location of the screws and type of GPU brackets will vary.

Steps

  1. Remove the screws securing the front I/O bracket to the GPU, and remove the I/O bracket.
  2. Remove the screws securing the support bracket to the GPU, and remove the support bracket.

    Removing the custom Nvidia GPU I/O brackets and the support brackets:

    Figure 1. Removing the custom Nvidia GPU I/O brackets and the support brackets
    This figure shows removing the custom Nvidia GPU I/O brackets and the support brackets.
    1. Torx screw (2)
    2. support bracket
    3. GPU
    4. I/O bracket
    5. screw (5)

    Removing the custom Intel GPU I/O brackets and the support brackets :

    Figure 2. Removing the custom Intel GPU I/O brackets and the support brackets
    This figure shows removing the custom Intel GPU I/O brackets and the support brackets.
    1. support bracket
    2. GPU
    3. screw (8)
    4. I/O bracket

    Removing the custom AMD I/O brackets and the support brackets:

    Figure 3. Removing the custom AMD I/O brackets and the support brackets
    This figure shows removing the custom AMD GPU I/O brackets and the support brackets.
    1. pan head screw
    2. screw (4)
    3. support bracket
    4. GPU
    5. alignment guide
    6. I/O bracket
    7. flat head screw (2)

Next steps

Remove the GPU brackets from the replacement GPUs.

NOTE: This procedure is not applicable to the AMD GPUs since the replacement AMD GPUs are shipped without brackets.

Classifique este conteúdo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
0/3000 characters
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Selecione se o artigo foi útil ou não.
  Os comentários não podem conter estes caracteres especiais: <>()\