Dell Command
| Monitor
enables the RAID configuration
information and monitors the RAID functionality for client systems
with hardware and driver support. You can use RAID classes to receive
the details about RAID levels, driver information, controller configuration,
and controller status. After the RAID configuration is enabled, you
can receive alerts for degradation or failure of drives and controllers.
NOTE: RAID status reporting
is supported only for the RAID controllers which work on Common Storage
Management Interface (CSMI) version 0.81 compliant drivers. OMCI 8.1
and later versions support monitoring only on the Intel on-chip RAID
controller; and from OMCI 8.2 and later versions support Alerting
for Intel on-chip RAID controller.
Dell Command
| Monitor
9.0
and later versions also support LSI controller for monitoring and
alerting feature.
Det finns inga tillgängliga data för ämnet
Ange betyg (1–5 stjärnor).
Ange betyg (1–5 stjärnor).
Ange betyg (1–5 stjärnor).
Ange om artikeln var användbar eller inte.
Kommentarer får inte innehålla följande specialtecken: <>()\