Dell Command | Configure Version 4.1.0 Command Line Interface Reference Guide

Setting the non-critical threshold values

Sets the non-critical threshold values for a given probe. It is possible to set upper non critical threshold values for Voltage, Current, Temperature and cooling device probes

To set the non-critical threshold values for a probe, type:

cctk Advsm --Set=<
                                    cctk option name>:<upper non critical threshold value>

NOTE: Here, cctk option name is the component for which you want to set the non-critical threshold values in a probe. You can obtain the cctk option name for a probe using the report command. Refer User’s Guide for more information.

For example, to set the non-critical threshold values for a voltage probe, type:

cctk Advsm --Set=Voltage_1:10

For example, to set only the upper non-critical threshold value for a current probe, type:

cctk Advsm --Set=Current_1:100

For example, to set the non-critical threshold values for a cooling probe, type:

cctk Advsm --Set=Cd_1:10

For example, to set only the upper non-critical threshold value for a temperature probe, type:

cctk Advsm --Set=Temperature_1:100

If the system has a setup password, while setting the non-critical threshold values specify the setup password and set the non-critical threshold values as:

cctk Advsm --Set=<
                                    option name>:<
                                    upper non critical threshold value> --ValSetupPwd= <
                                    setup password>

For example, to set the non-critical threshold values for a voltage probe on a system with a setup password, type:

cctk Advsm --Set=Voltage_1:10 --ValSetupPwd= <
                                    setup password>

For example, to set the non-critical threshold values for a current probe on a system with a setup password, type:

cctk Advsm --Set=Current_1:55 --ValSetupPwd = <
                                    setup password>

For example, to set the non-critical threshold values for a cooling probe on a system with a setup password, type:

cctk Advsm --Set=Cd_1:55 --ValSetupPwd = <
                                    setup password>

For example, to set the non-critical threshold values for a temperature probe on a system with a setup password, type:

cctk Advsm --Set=Temperature_1:55 --ValSetupPwd = <
                                    setup password>

If the system has a system password and no setup password, while setting the non-critical threshold values specify the system password and set the non-critical threshold values as:

cctk Advsm --Set=<
                                    cctk option name>:<
                                    upper non critical threshold value> --ValSysPwd= <
                                    system password>

For example, to set the non-critical threshold values for a voltage probe on a system with a system password and no setup password, type:

cctk Advsm --Set=Voltage_1:10 --ValSysPwd = <
                                    system password>

For example, to set the non-critical threshold values for a current probe on a system with a system password and no setup password, type:

cctk Advsm --Set=Current_1:10 --ValSysPwd = <
                                    system password>

For example, to set the non-critical threshold values for a cooling probe on a system with a system password and no setup password, type:

cctk Advsm --Set=Cd_1:10 --ValSysPwd = <
                                    system password>

For example, to set the non-critical threshold values for a temperature probe on a system with a system password and no setup password, type:

cctk Advsm --Set=Temperature_1:10 --ValSysPwd = <
                                    system password>

Welcome

Welcome to Dell

Dell Command | Configure Version 4.1.0 Command Line Interface Reference Guide

Setting the non-critical threshold values

Rate this content