Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Wyse Management Suite Version 1.1 Deployment Guide

PDF

Deployment architecture

This chapter contains the deployment architecture details for Wyse Management Suite v1.1.

The Wyse Management Suite v1.1 supports up to 1,20,000 connected devices.

The single server deployment solution is easy to maintain, and you have an option to deploy Wyse Management Suite, using multiple servers depending on your deployment scenario.

You can also deploy customize your deployment for 50,000 devices or more number of devices depending on the deployment setup.

Deployment on a single server to support 50,000 devices and above

This section explains Wyse Server Management Suite deployment on a single server to support 50,000 devices and above.

The minimum hardware requirement on a single server for 50,000 devices is:

Table 1. Hardware specification. The minimum hardware requirement on a single server for 50,000 devices is as follows:
Application detailHardware specification
Wyse Management Suite 1.14 CPUs, 16 GB RAM, 40 GB HDD

The following diagram explains deployment of Wyse Management Suite v1.1 on a single server.

Figure 1. Single server deployment — 50000 devices Single server deployment

Deployment on a single server to support 1,20,000 devices

This section explains Wyse Server Management Suite deployment on a single server to support 1,20,000 devices.

The minimum hardware requirement on a single server for 1,20,000 devices is:

Table 2. Hardware specification. The minimum hardware requirement on a single server for 1,20,000 devices is as follows:
Application detailHardware specification
Wyse Management Suite 1.116 CPUs, 32 GB RAM, 200 GB HDD
Figure 2. Single server deployment — 1,20,000 devices Single server deployment on 1,20,000 devices

FE MQTT Servers separated from the Wyse Management Server

This section explains about the architecture of FE MQTT Servers separated from the Wyse Management Suite server. This approach reduces the overhead on the Wyse Management Suite server in handling the number of TCP connections that needs to be supported. Each of the FE MQTT servers may be deployed on a separate server or on a single server.

The minimum hardware requirements are:

Table 3. Hardware requirements. Hardware requirements
Application detailHardware specification
Wyse Management Suite 1.18 CPUs, 16 GB RAM, 200 GB HDD, 1 network interface
Each FE MQTT server deployed on separate servers.4 CPUs, 8 GB RAM, 40 GB HDD, 1 network interface
FE MQTT Server deployed on a single server.8 CPUs, 16 GB RAM, 80 GB HDD, 1 network interface

The following diagram depicts the architecture of FE MQTT Servers separated from the Wyse Management Suite server.

Figure 3. FE MQTT Servers separated from the Wyse Management Suite server FE MQTT Servers separated from the Wyse Management Suite server

Deployment architecture with a separated database server

This section explains about the deployment architecture of Wyse Management Suite with a separated database server. MongoDB and MariaDB may be on the same server or on its own individual servers.

The following diagram depicts the deployment architecture of Wyse Management Suite with a separated database server.

Figure 4. Wyse Management Suite with a separated database server Wyse Manamgement Suite with a separated database server

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\