You can configure the Peak Shift battery charging mode using the peakshiftcfg option from the Power and Performance Management category. Using Peak Shift configuration, you can minimize the consumption of AC power during the peak power usage period of the day. You can set a start and end time for the Peak Shift period. During this period, the system runs on battery if the battery charge is above the set battery threshold value. After the Peak Shift period, the system runs on AC power without charging the battery. The system functions normally by using AC power and recharging the battery at the specified Charge Start Time.
To configure the Peak Shift Battery charging option:
Operate only on battery time should be less than or equal to the time specified for Operate only on AC.
Operate only on battery time and Operate only on AC time should be less than or greater than the Resume normal power/charge time.