Dell Chassis Management Controller Version 6.0 for PowerEdge M1000e User’s Guide

Configuring Active Directory With Standard Schema Using RACADM

1. Open a serial/Telnet/SSH text console to the CMC, and type:

   racadm config -g cfgActiveDirectory -o cfgADEnable 1
   racadm config -g cfgActiveDirectory -o cfgADType 2
   racadm config -g cfgActiveDirectory -o
   cfgADRootDomain <fully qualified root domain name>
   racadm config -g cfgStandardSchema -i <index> -o
   cfgSSADRoleGroupName <common name of the role
   group>
   racadm config -g cfgStandardSchema -i <index>-o
   cfgSSADRoleGroupDomain <fully qualified domain
   name>
   racadm config -g cfgStandardSchema -i <index> -o
   cfgSSADRoleGroupPrivilege <Bit mask number for
   specific user permissions>
   racadm sslcertupload -t 0x2 -f <ADS root CA
   certificate>
   racadm sslcertdownload -t 0x1 -f <RAC SSL
   certificate>

   NOTE For bit mask number values, see the database property chapter of the Chassis Management Controller for Dell PowerEdge M1000e RACADM Command Line Reference Guide.
2. Specify a DNS server using one of the following options:
   • If DHCP is enabled on CMC and you want to use the DNS address obtained automatically by the DHCP server, type the following command:

     racadm config -g cfgLanNetworking -o
     cfgDNSServersFromDHCP 1

   • If DHCP is disabled on CMC or you want manually to input your DNS IP address, type the following commands:

     racadm config -g cfgLanNetworking -o
     cfgDNSServersFromDHCP 0
     racadm config -g cfgLanNetworking -o
     cfgDNSServer1 <primary DNS IP address>
     racadm config -g cfgLanNetworking -o
     cfgDNSServer2 <secondary DNS IP address>